How much room do you need for a pool table?

A pool table needs far more floor than its own footprint: you need room to draw the cue back on every side. The usual rule is the playing surface plus one cue length (about 58 in) on each side, measured from the cushion nose, not the outer rail.

Room sizes at a glance

Table size Typical playing surface Room with 58 in cues Room with 52 in cues Room with 48 in cues
7 ft approx. 39 × 78 in approx. 13 × 16 ft approx. 12 × 15 ft approx. 11.5 × 14.5 ft
8 ft approx. 44 × 88 in approx. 13.5 × 17 ft approx. 12.5 × 16 ft approx. 12 × 15.5 ft

Playing surfaces vary slightly by table; the figures above are typical, not exact for every model. If a room is a little short on one side, keep a shorter cue in the rack for those shots — most people do.

Check your room in four steps

  1. Measure wall to wall, and note doors, posts, radiators and the bottom step of any stairs.
  2. Mark the table's outer footprint on the floor with painter's tape, centred in the room.
  3. Hold a cue (or a broom handle cut to 58 in) at the tape line and check you can draw it back on every side.
  4. Leave a walkway past the table and somewhere to stand a cue rack.

Which of our tables?

Not sure? Email us your room size and a sketch and we will tell you honestly which size fits.